Välljud AB är svensk importör med distribution av följande AirTight - Ear/Yoshino - My Sonic Lab - Moscode - North Star Design - Rockport Technologies - Acoustic Plan - Zyx - Helius Designs - Oyaide - Graham Audio - Convergent Audio Technology - Lamm Industries - Music Reference / RAM Labs - Analysis Audio - Oracle Audio - Eminent Technology - Nitty Gritty - AudioDesk Systeme
Specially rigid black aluminum cantilever
Normally the sound of aluminum is very natural, but cannot follow to high frequency perfectly. In order to achieve both its characteristic natural sound and the wide range reproduction, the R50 Bloom 3 has a newly developed rigid aluminum cantilever for the first time.
Cartridge Case For REAL STEREO
Item 11,12 and 13 of the vital design points make very complex demand of the body's electrical properties. Non metallic body is necessary in order to achieve these properties, and to prevent external disturbances from influencing the generator system and also, it prevents eddy currents in the case from effecting the generator output signal.
The stylus used in the R50 Bloom 3 is the line-contact stylus which can playback up to 40 kHz. And also it has the edges of the diamond shank set parallel to the sides of the cantilever. Using this type of stylus, the hardest axis of the crystal is aligned to act as the contact point with the record groove. This gives stable and smooth tracing and produces a very refined sound, with the additional benefit of giving the stylus an extended life.
Super High speed reproduction engine (magnetic circuit)
This circuit is specially processed to null magnetic resistance within magnetic gap, and enables high speed power generation against signals over entire bandwidth straightly without time delay.
|Type||Moving Coil (Dynamic)
“REAL STEREO” Generator System
|Cryogenic Treatment||Temperature: -196 ℃ (-320оF)|
|Output Voltage||0.24mV (0.48mV) (3.54cm/sec, 1kHz)|
|10 Hz - 100 kHz
20 Hz - 20 kHz
|Channel Separation||＞ 30dB 〔 1kHz 〕|
|Channel Balance||＜ 0.5dB 〔 1kHz 〕|
|Recommended Tracking Force||2.0gm 〔 20 ゜C-25 ゜C 〕|
|Tracking Force Range||1.7gm - 2.5gm|
|Internal Impedance||4.0 Ω (8.0 Ω)|
|Load Impedance||＞ 100Ω|
|Coil Wire||6N OFCφ0.035mm|
|Cantilever Material||Black ALMg5 tube φ0.45×φ0.30mm|
|Stylus||Line-contact Solid Diamond □0.1mm|
|Contact Radius, Life Time||6μm×35μm, 2000Hour/2.0gm|
|Output Terminals||φ1.25mm gold plated〔EIA〕|
|Terminal Board||Glass Epoxy Plate|
|Net Weight||5.0gm, 7.7gm(TB), 9.5gm(SB)